Wooden floors in bathrooms.
Some options of wooden flooring laying in bathrooms
http://normawood.com/index.php?option=com_k2&Itemid=121&id=18&lang=en&layout=item&view=item#sigProGalleriadddb32a63e
We know how to make wooden floors in rooms with high humidity.
Normawood TMW is used in SPA interiors, bathrooms, toilet facilities and swimming pools. TMW is used to produce shower drains, countertops, deck-chairs, sauna accessories.
Floors and interior elements made of TMW are not afraid of getting wet , drying , steam, temperature rises or falls .
Installing the board:
there are only two basic options: board is securely fixed (glued) or installed in the premises using terrace concept (see layouts)
When gluing the screed board we always use high-quality glue and Multymoll or analogs.
Board installed in wet areas always requires more frequent maintenance.
Water, detergents and cosmetics can leave traces on the board.
We use Danish oil WOCA to protect the plank floor
WOODEN HEATED FLOOR
Parquet board made of thermally modified ash can be easily laid on the heated floors. At that, the temperature of the coolant in the circuit should not be higher than 25 degrees. You should also pay attention to the installation of temperature sensors or you can avoid using them (since the board is a heat insulator, the heating system may fail during operation). At higher temperatures, the glue loses strength and dies out. Board can withstand the high temperatures but as regular parquet is subject to condensate in screeds – i.e. moisture effect.
Any board reduces circuit heat transfer and heating efficiency by about 40 percent.