CATALOGS

2017
September
MTWTFSS
28293031010203
04050607080910
11121314151617
18192021222324
25262728293001
02030405060708

Hidden fastening for wooden fronts

FassadenClip FCS is aesthetically perfect solution for wooded fronts fastening. It can be used for mounting of front profiles with a width of 57 - 95 mm. Board with a width that greater than 95mm may not be stable.

FassadenClip creates uniform gaps between lamellas that provides ventilation and insulation of the front system and protects the wood.

Gap with a width of 8mm can be created without additional tools due to the limiter. This is especially useful for mounting a diamond-shaped profile.

If you need a gap between the boards of ess than 8mm the FassadenClip is equipped with a second position for screwing that allows you to manually create any desired width.

FassadenClip. Mounting Method

FassadenClip FCS is screwed with two special screws L-BohrFix to the back side of the wooden profile. Immersion depth of the screw must be at least 4 \ 5 of lamella thickness.

This protects the boards from the transverse deformation.

The outer surface and edges of front profiles remain fully intact.

Important!

The log should be at least of 50mm. It is uncomfortable to apply fasteners on a narrower strip.

For most types of boards the distance between logs is 600mm
Per 1 sq. m. usually 17 -18pcs of FassadenClip FCS is needed.

Яндекс.Метрика