FassadenClip FCS is aesthetically perfect solution for wooded fronts fastening. It can be used for mounting of front profiles with a width of 57 - 95 mm. Board with a width that greater than 95mm may not be stable.
FassadenClip creates uniform gaps between lamellas that provides ventilation and insulation of the front system and protects the wood. Gap with a width of 8mm can be created without additional tools due to the limiter. This is especially useful for mounting a diamond-shaped profile. If you need a gap between the boards of ess than 8mm the FassadenClip is equipped with a second position for screwing that allows you to manually create any desired width. |
FassadenClip. Mounting Method
FassadenClip FCS is screwed with two special screws L-BohrFix to the back side of the wooden profile. Immersion depth of the screw must be at least 4 \ 5 of lamella thickness. This protects the boards from the transverse deformation. |
|
The outer surface and edges of front profiles remain fully intact. | |
Important! The log should be at least of 50mm. It is uncomfortable to apply fasteners on a narrower strip. For most types of boards the distance between logs is 600mm |